Quantum-data 801GC Manual de usuario descargar pdf (Pagina 290)

6-164 Chapter 6: Programming

Model 801GC, 801GF & 801GX¥Rev. A

SIZE SIZE of bit field

Classification: Direct processor control

Command Syntax: SIZE <size>

Limits: <size>

-32 to -1 or 1 to 32 bits

Query Syntax: SIZE?

Query Response: <size>

Description: The SIZE command sets the field size (in base 10) used in

connection with the GETA, GETR, PUTA, and PUTR commands.

If a negative size is specified, then values given (or returned)

are sign extended to 32 bits. For example, if SIZE = -16 and a

16 bit field containing FFFF hex is fetched, then the value

FFFFFFFF hex is returned. The SIZE? query returns the current

setting of SIZE in base 10. SIZE is preset to 16 each time the

generator is powered on.

Note – This command will normally be used only with custom

applications and command files created by Quantum Data.

Other Required Cmds: None

Example: Use only with code supplied by Quantum

Data!

SMOD Sequence operating MODe

Classification: Sequence parameter setting

Command Syntax: SMOD

Limits: <mode>

0 = Disable

1 = Enable manual step mode that stops at last step

2 = Enable manual step mode that wraps to first step

after last step

3 = Enable continuous auto stepping

Query Syntax: SMOD?

Query Response: <mode>

Description: The SMOD command sets the sequence mode. The SMOD? query

returns the current setting of SMOD.

Other Required Cmds: The SEQL command loads the sequence and SEQU starts to run

it.

Example: SEQL MY_SEQ // Load "MY_SEQ" dir in

// edit buffer

SEQU // Start running the sequence in

// the buffer

SMOD 3 // Set the sequence mode

1 2 ... 285 286 287 288 289 290 291 292 293 294 295 ... 355 356

Sin comentarios

Quantum-data 801GC Manual de usuario Pagina 290