Quantum Data 801GF Especificaciones Pagina 16
- Pagina / 40
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Page 16 Model 801GC-ISA & 801GF-ISA Programming Manual
AVSS <level>
Limits: <level> > (floating point accepted)
min = 0.000 volts
max = 0.715 volts
Description: The AVSS command sets the maximum peak-to-peak swing for all three analog video
channels. The actual peak-to-peak swing of the analog video signals at the output connectors
is equal to the product of: AVSS multiplied by AVSC. The AVSS? query returns the current
setting of AVSS.
AVST <type>
Limits: <type>
0=none
1=Analog Y (grayscale)
2=Analog RGB (color)
3=Analog TV Y (grayscale)
4=Analog TV EYC (color subcarrier)
5=Analog YPrPb (color difference)
Must be zero (0) when any digtal video type is selected (DVST ? 0).
Description: The AVST command establishes the type of signal that appears on the analog video outputs
of the generator. The AVST? query returns the current setting of AVST.
BASE <radix>
Limits: <radix> = 0 to 36
Description: The BASE command establishes the radix of address and data parameters passed-to or
returned-from the ADDR, GETA, GETR, PUTA, PUTR, and CALL instructions. If a negative
radix is specified, then parameters passed (or returned) from these functions are assumed to
be signed. For example, if BASE= -16, then the value -1 is used to communicate the value
FFFFFFFF hex. The BASE? query returns the current setting of BASE. The radix <radix> is
always passed and returned in base 10, regardless of the setting of BASE. BASE is preset to -
10 each time the generator is powered on. Base -10 is the preferred radix. The BASE? query
returns the current setting of BASE.
BOOT
Description: Warm Boot
CACH <mode>
Limits: <mode>
0 = OFF
1 = ON
Description: Instruction Cache Enable
CALF <Video 1000> <Video 700> <Sync 400> <Sync 40> <NTSC714> <PAL700>
Limits:
Description: Analog video calibration factors
- ISA Video Generator 1
- Programmer’s Manual 1
- For more information… 2
- Open Port 5
- Port Command 6
- Port Query 6
- Board Init 7
- Error Messages 7
- For More Information 7
- Appendix B: Command Language 9
- Command and Query Finder 9
- Last 2 Digits of Year 32
- Day of the Month 32
- B = Nov., C = Dec) 32
- Listing of: HEADER.BAS 35
- Quantum Data Corporation 40
Relacionado con productos y manuales para Generadores De Poder Quantum Data 801GF
(16 paginas)Philips HR2303/10 manuels
Manuels d'utilisation et guides de l'utilisateur pour Non Philips HR2303/10.
Nous fournissons des manuels en pdf 1 Philips HR2303/10 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentarios a estos manuales