Quantum Data 801GF Especificaciones descargar pdf (Pagina 24)

Page 24 Model 801GC-ISA & 801GF-ISA Programming Manual

FRGB <red factor>, <green factor>, <blue factor>

FRGB <common grey factor>

Limits: <factor>

min = 0

max = 255

Description: Temporarily sets foreground to given color levels. Not global and not saved.

GAMA <factor>

Limits: <factor> = non-zero value (floating point accepted)

Description: The GAMA command establishes the current analog video gamma correction factor. In order

to apply any gamma correction to the format, the GAMC parameter must be turned on. The

GAMA? query returns the current setting of the gamma correction factor.

GAMC <mode>

Limits: <mode>

0 = don’t correct (correction off)

1 = correct (correction on)

Description: The GAMC command enables or disables application of the analog video gamma correction

factor. The GAMC? query can be used to determine if the gamma correction factor is

currently being applied.

GETA? <address>

Limits: <address>

0 to 4,294,967,295 (BASE = 10)

-2,147,483,648 to 2,147,483,647 (BASE = -10)

0 to FFFFFFFF (BASE = 16)

-80000000 to 7FFFFFFF (BASE = -16)

Query Response: <value>

Description: The GETA? query returns the value of the data stored at the memory <address> specified.

Up to 32 bits can be read with this query (see SIZE command). The returned value <value> is

formatted according to the current setting of BASE (see the BASE command).

GETR?

Query Response: <value>

Description: The GETR? query returns the value of the data stored at the memory location currently

pointed to by the address register (see ADDR command). Up to 32 bits can be read with this

query (see SIZE command). The returned value <value> is formatted according to the

current setting of BASE (see the BASE command). The address register is automatically

incremented by SIZE bits after the current location has been read.

GRID <color1> <x-boxes> <y-boxes>

Description: Draws a grid of the given color. The grid forms the given number of boxes in each direction.

GRIH <color1> <width on> <width off>

Description: Draws a horizontal series of full height bars of the given color. The bars are drawn with the

given width and spacing between the bars.

GRIV <color1> <width on> <width off>

Description: Draws a vertical series of full width bars of the given color. The bars are drawn with the

given height and spacing between the bars.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Comentarios a estos manuales

Sin comentarios

Quantum Data 801GF Especificaciones Pagina 24

Comentarios a estos manuales

Relacionado con productos y manuales para Generadores De Poder Quantum Data 801GF